1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 66Get this manual

1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual, Page 66

Primer System Servicing
Function Test

1Start engine and allow it to reach normal operating temperatureSet engine speed at 2000 RPM
[!] 2While engine is running, push key in Engine should run richly and drop 1000 RPM23999

f21 3Remove primer hose from primer fitting that you suspect is cloggedConnect 18 in1.0clear vinyl hose between the fitting and syringe filled with isopropyl alcohol4Press lightly on the syringe If fluid moves through the fitting, it is okay If fluid does not move through the fitting, clean with OMC Cleaning Tool PIN 326623Solenoid Removal

Back to 1991 Johnson Evinrude EI 60 Loop V Models 150, 175 outboards Service Manual