1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 358Get this manual

1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 358

Trim Sending Unit Adjustment It might be necessary to adjust the trim sending unit to coincide with the trim gauge at full trim-up positionTo do this, proceed as follows1Turn ignition key to the ON position2Raise the engine with the tilt switch to maximum trim-up position
1321 31331 4
Move the angle adjusting rod

to the center hole
until only snugso

Loosen the sending unit screws the sending unit can be pivoted

Back to 1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874