1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 285Get this manual
Electric Starter Servldng Removal
INote Disconnect the battery cables at the battery1Disconnect the starter motor lead at the motorV6 modelsRemove the negative battery cable from the starter motor mounting flange2Remove the starter solenoid3If necessary, remove the carburetor air silencer assembly for improved access
rv 4Remove the three screws and lockwashers retaining the L!J starter to the powerhead
Disassembly
[]] 1Observe alignment marks on commutator end cap and drive end cap for correct reassemblyRemove two thru-bolts from starter motor
2Tap the commutator end cap and carefully remove it to prevent the loss of four springs under the two ground brushes and insulated brushes3Tap the drive end cap to loosen it and pull armature from the frame You will find that the permanent magnets in the frame will resist removal of the armature