1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 260Get this manual
Driveshaft Bearing Housing Servicing The driveshaft bearing is not serviceableReplace the bearing housing if the bearing is worn or damagedAlso, inspect the driveshaft bearing surface if bearing is damaged 1351 Remove and discard the two driveshaft bearing housing 2Remove and discard the O-ring from the bearing housing
seals using OMC Puller Bridge PIN 432127 and OMC Large Puller Jaws PIN 432129
3Clean the bearing housing in solvent to remove sealer from the seal bore and the O-ring groove
13611371 Install new seals backPIN back in the Apply OMC Gasto bearing housing 330268using OMC Seal Installer
ket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the bearing housing and the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installing