1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 257Get this manual
21 Remove the pinion bearing only if it needs to be replacedBefore attempting removal, take out the bearing retaining screw on the side of the gearcase, otherwise the gearcase will be damagedReplace the screw's O-ring22If the pinion bearing must be replaced, use OMC Bearing 1257 and assemble it as followsRemover and Installer PIN 39-
Flange Nut Plate Rod PIN 326579 Remover
PIN 326586 PIN 391260 PIN 326582
1 Use Pisturn wrench to holdclockwise andindraw the bearing up 201 wrench, inthe flange nut the remover placeUsing inand out of the gearcaseMake sure all loose needles are inside bearing case before pulling bearingThe needles will provide surface for the remover tool to pull against