1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 251Get this manual

1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 251

Installation
rv splines with OMC MolyonLubedriveshaftCoat the driveshaft 1Place new O-ring the Do not coat top surface of the
driveshaft as lubricant here may prevent seating of the driveshaft in the crankshaft
Apply Scotch Grip Rubber Adhesive 1300 to the lower exhaust housing seal inner surfacesPosition two new seals on the housingApply OMC Triple-Guard grease to the seal outer surfaces and position the housing on the gearcase
3Slide the gearcase into place making sure that the driveshaft
engages the crankshaft, the water tube enters the water pump, and the lower inner exhaust housing does not slip out of position,

Ial f41151 4Apply

OMC Gasket Sealing Compound to the attaching screwsInstall and tighten the screws to the following torques:

Back to 1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874