1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 204Get this manual
7Remove the screws, stern bracket to trim manifold and remove the trim and tilt unit8For trim and tilt unit servicing information, refer to Section 9Assembly
INotel Before
proceeding, be sure all components have been thoroughly cleanedReplace any seals that have been removedInspect all thrust washers and bushings for evidence of deterioration
f61 1Install an upper steering shaft bushing, lower seal and upper seal in the swivel bracketBoth seal lips face out Coat seal's outside diameter with OMC Gasket Sealing Compound Coat the bushing and seal lips with OMC Triple-Guard grease2Install the trim and tilt unitApply OMC Locquic Primer and OMC Nut Lock to the threads of screws, stern bracket to trim manifoldInstall them loosely