1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 70Get this manual

1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874, Page 70

Warning Signals
f'N'='J Avoid pulling "E.S1763" fuel line off fuel fittingsPush off wherever possibleWhen removing "E.S1763" fuel line from VRoi fittings, carefully cut the hose to avoid damaging the
fittings" low Oil" Signal complete procedure for testing the "low oil" circuit can be found in Installation Recommendations, this section"No Oil" Signal 1Connect shop tank with 50:1 fueloil mixture to the fuel inlet fitting
2Remove the oil supply hose from the VRO oil inlet fitting3Start the engine and run at 1000 RPM in gear
4After the residual oil is exhausted from the VRO oil pump, the

Back to 1990 Johnson Evinrude "ES" Cross V 88 thru 115, 150 thru 175, P/N 507874