1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870, Page 210Get this manual
Assembly Assemble the Bushing Installer to the Rod (components of OMC Driveshaft Bearing Remover and Installer, PIN 392092)Place the bushing onto the Bushing and Installer with O-ring downApply OMC Adhesive to the outside of the bushingUsing mallet, drive the bushing into the gearcase until seatedponents of OMC Driveshaft Bearing Remover and Installer, PIN 392092 (RodGuide PlatePinand Small Disc with concave side toward bearing) as shownPlace the lettered side of the bearing toward the small discUsing mallet, drive in the lower bearing until the pin comes in contact with the guide platecomponents of OMC Driveshaft Bearing Remover and Installer, PIN 392092 (RodGuide Plateand Large Disc with concave side toward bearing) as shownPlace the lettered side of the bearing toward the large discUsing mallet, drive the upper bearing in until it is seated firmly
1221 1Oil and install new O-ring into new shift rod bushing
1231 2To install new lower driveshaft bearing, assemble com-