1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870, Page 196Get this manual

1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870, Page 196

Installation 1Insert the stop button wires and the throttle cable through the grommet in the lower engine cover2Apply OMC Triple-Guard grease to the two steering handle bushingsPlace the bushings into the steering bracketAttach the steering handle to the steering bracket3Secure the stop button ground lead to the powerhead COA1588

4Connect the 1-pin Amphenol connector
f21l1221 5Thread the throttle cable
onto the cable6 To adjust the throttle cable:

Back to 1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870