1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870, Page 128Get this manual
Installation
!1sl 1Install the flywheel key with outer edge parallel to centerline of the crankshaft and single upset mark facing down,
INotel Make certain the single mark is facing down2Install cam
marked "TOP" must be upj
1161 3Apply coating of OMC Moly Lube to the armature
support plate and retaining ring Install retaining ring with tapered side down CDThen, install wave-washer and support plateAlign retaining ring with the armature plateDo NOT add oil or grease to the oiler wick
L!!J avoiding damage to the breaker armsCam follower must
NOT be caught under the throttle control camTighten the Phillips screwsAdjust the breaker pointsBreaker Point Adjustment
f11"l 4Place the armature plate in position over the crankshaft,