1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870, Page 103Get this manual

1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870, Page 103

Ignition Plate ServicingCD2UL Ignition System Removal

i twist and remove all spark plug leads
'" 1To avoid accidental starting of engine while servicing,

2If equipped, remove the manual starterSee Section 73Remove the flywheelRefer to Flywheel Servicing
L!J retainer plateLift the ignition plate from the powerhead
r.jl4Loosen the five screws attaching the ignition plate to the 5Remove the four support plate screws Lift the retainer and support plates from the powerhead
Installation 1Place the retainer plate, then the support plate on the powerheadAlign support plate with four screw holes in powerheadApply OMC Nut Lock to threads of the four support plate screws Install and tighten the screws to torque of 48-60 inIbs(5-7 Nm)

Back to 1990 Johnson Evinrude "ES" Colt/Junior thru 8 Service Manual, P/N 507870