1990 Johnson Evinrude "ES" 9.9 thru 30 Service Manual, P/N 507871, Page 272Get this manual
r=j4l 9Bend the inside loop of the rewind spring in toward l!.J the ?f the starter tiousingEngage the pin of the pulley .wlth the mner of the rewind spring and install the pulley In the starter housmg [ill 1O
apply O!,C Triple-Guard grease or Lubriplate 777 to the spmdle bushmg and pawl pins on the pulleyInstall the bushing and the shim into the starter pulleyNext install the friction platelinks and pawlsSecure the pawls with the retaining clips
11apply OMC Triple-Guard grease or Lubriplate 777 to the spmdleInstall the spindlefriction ring and two spring washers
INotel The
section of the friction ring and spindle be aligned