1990 Johnson Evinrude "ES" 9.9 thru 30 Service Manual, P/N 507871, Page 241Get this manual
f18I 15Use OMC Bearing Puller PIN 432130 attached to OMC Slide Hammer PIN 432128 to remove the forward bearing cupSecure the puller jaws into grooves behind the cup with jaws facing port and starboardUse OMC Wrench PIN 334359 to hold the puller while tightening the jaws1191 16Use OMC Puller Bridge PIN 432127 and OMC Small Puller PIN 432131 to remove the driveshaft seals from the gearcase Inspect bearings in placeIf bearing is removed for any reason it must be replaced 1201 17Remove the upper driveshaft bearing and bearing sleeve from the gearcase using the same two toolsDiscard the bearing'21l 18To remove the pinion bearings, assemble the following components from OMC Universal Pinion Bearing Remover and Installer PIN 391257:
PIN 326582 Rod PIN 326583 Pilot Plate PIN 326577 Remover and Installer -20 112 inHex Head Screw -20 inHex Head Screw CD in0.0Flat Washer