1990 Johnson Evinrude "ES" 9.9 thru 30 Service Manual, P/N 507871, Page 229Get this manual
G}] 16 Remove the forward gear roller bearing
1141 17Remove the shift rod bushing as follows: Position OMC Shift Rod Bushing Remover PIN 327693 under the shift rod bushing Thread the adapter ofthe Universal Slide Hammer PIN 391008 in the slide hammerPlace the adapter through the shift rod bushing and thread into the remover tool Remove the handle from the remover toolThen remove the bushing from the gearcase Once the bushing has been removed from the gearcase, examine the bushing for damageIf damaged, replace the bushing on reassemblyRemove and discard the O-ring from the bushing G51 18Use OMC and Seal Remover PIN 391259 to the two dnveshaft seals