1990 Johnson Evinrude "ES" 9.9 thru 30 Service Manual, P/N 507871, Page 198Get this manual
Exhaust Housing Servicing9.9, 15 Removal and Disassembly 1Remove the powerhead as described in Section 42Remove the gearcase as described in Section 6
r:jl r:jl r:jl
3Remove the screw and the clip retaining the shift lever to the bellcrank 4Remove the two screws with lockwashers retaining the shift leverPull the shift lever out of the lower engine cover
5Remove the cotter pin Disengage the upper shift rod from the bellcrank and remove the rodOn electric start models, remove the cable and clamp from the inside of port stern bracket6Lift the lower engine cover off the exhaust housing
7Remove the two lower mount bracket screwsRemove the port and starboard lower mount brackets with two lateral mounts