1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 292Get this manual
r:j1l '" 11 Oil and install the manual release valve Thread
the valve all the way into the manifoldTighten the valve to torque of 45-55 inIbs(5-6 Nm)Using OMC Retaining Ring Pliers PI 303857, install the retaining ring with the sharp edge of the ring facing out12Oil and install the trim-up relief valve seat ring Place the core and spring in the seat
!131 filterPlace the steeland a-ring in the positionand install new 13ball in the manifold Oil valve seat shown1141 14Insert the filter up through the manifold plate Using the three screws, flat washers, and lockwashers, secure the manifold plate to the manifoldTighten the three screws evenly so that the plate does not become cocked Tighten the screws to torque of 25-30 in Ibs(2,8-3,4 Nm)15Clean the oil reservoirInstall new a-ring on the reservoir