1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 258Get this manual
Electrical Cable '" Disconnect battery cables before servicing electrical systemsFailure to do so could result in injury from ignition sources (sparks) or from contact with moving parts if accidental cranking or starting occursProvide sufficient slack at motor end to permit steering and ilting of motor without bindingf11 1: Apply OMC Triple-Guard grease to shaded area figure
shown in
[!] 2Align arrows and push connectors firmly together3Secure the connectors with retainer
] 4Snap the retainer into clip on the exhaust coverf41 5Route the positive (red) battery cable to
with rubber boot
ill solenoid Secure cable to starter solenoidCover terminal
6Secure negative battery cable ground terminal
starter