1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 226Get this manual
Solenoi CheckAll Models 1Note 1
All engine wiring must be disconnected from the solenoid before proceeding with this test
1Calibrate an ohmmeter on high ohms scale and connect one lead to terminal and the other lead to terminal The ohmmeter should show very high reading (00) If the ohmmeter reading is very low (zero), replace the solenoid
2 Attach positive battery jumper to terminal and negative battery jumper to terminal The solenoid should close with an audible click The ohmmeter should show very low reading (zero) If the ohmmeter reading is very high (00), replace the solenoid
3 After installing the solenoid, coat all wires and terminals, except the battery "+" connection, with OMC Black Neoprene Dip
No Load Current Draw, Electric StarterAll Models
INote Securely fasten