1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 211Get this manual
COA 1362
COA 136 1
8Bend the inside loop of the rewind spring in toward the center of the starter housing Engage the slot of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing 9Place the friction plate spring washer and the friction plateon the pulley hubSecure the friction plate and friction plate spring washer with the pulley lockring 10Be sure the starter pawl bushing is installed in the pulley Apply OMC Triple-Guard Grease or Lubr iplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulley