1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 201Get this manual
20Align the bossed word "FRONT" toward the shift rod and push the driveshaft bearing housing in position Apply OMC Gasket Sealing Compound to the threads of the housing retaining screws Install the screws and tighten the screws little at time to press the bearing housing down evenlyTighten the screws to torque of 96-120 in Ibs(11-14 Nm) r;;-:;-tr;;::;! 21Place the smaller thrust washer in recess of the reverse gearOil, then install first the thrust bearing and then the larger thrust washer on the hub of the reverse gearSlide the reverse gear onto the propeller shaft until it engages the pinion
COA3597
22 Slide the bearing housing retainer plate into position over the propeller shaft