1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 198Get this manual
Assembly INotel Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable condition Refer to Cleaning and Inspection, Page 6-4After the gearcase has been thoroughly cleaned and inspected, install new pinion bearing in the gearcase as follows:
Assemble the following components of OMC Pinion Bearing Remover and Installer PI 391257 as shown
PIN 326582 Rod PIN 326575 Installer -20 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing on the toolCOA3082
-20 inHex Head Screw PIN 326584 Spacer in0.0Flat Washer
3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacer