1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 174Get this manual
1211 Lubricate and place the bushings in the swivel bracket1221 Place the swivel bracket in the stern bracketsLubricate
and place the thrust washers between the stern brackets and swiv" 8Remote Electric ModeL Insert the tilt tube through the stern and swivel bracketsTighten the tilt tube nuts to torque of 24-26 ftIbs(32-35 Nm)Then, back off nuts Va to 114 turn after applying torque9Manual Tilt ModelsPlace one tilt bolt washer on the tilt boltInsert the tilt bolt through the starboard stern bracket and thrust washer into the swivel bracket centerInstall the steering friction handle guard on the tilt bolt with the lip upPush the tilt bolt through the port side of the swivel bracket, thrust washer, and stern bracketInstall the other washer and the nutTorque the nut to 14-16 ftIbs(19-22 Nm)
Install the shock absorber upper pin through the swivel bracket and shock absorber rod endInstall the spring clip on the pin