1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 120Get this manual
Ohmmeter TestStop Button
All ohmmeter tests must be made with engine NOT runnmg
eJ emergency ignition cutoff device
r;l 1Most steering handles contain combination stop button When the clip and lanyard is removed, the emergency ignition cutoff device is in the STOP position When the clip and lanyard is installed, the emergency ignition cutoff device is in the RUN position To STOP the engine when the clip and lanyard is in place, press inward on the button2Install the clip and lanyard3Separate the 5-pin Amphenol connector between the power pack and stator assemblyr,;] 4Calibrate an ohmmeter on Rx100 scaleConnect meter