1990 Johnson Evinrude "ES" 60 thru 70 Service Manual, P/N 507873, Page 44Get this manual
Method JIB" Notelt is important that this step-by-step procedure be followed in sequence and be performed exactly as written to ensure consistent engine idling and smooth operation throughout the RPM rangeINotel The flywheel has two timing gridsBe sure the flywheel grid that is not marked "Rope" is used for remote control model adjustmentsRemove the throttle cable from the throttle control arm and the anchor pocket before beginning this procedureSet Timing Pointer INotellf the timing pointer or intake manifold has been disturbed, check the top dead center timing pointer alignment
L!J clockwise direction until the cast-in TDC mark is approximately 1112 in(4 em) past the timing pointer
'" 1To prevent accidental starting of the engine while servicing, twist and remove all spark plug leads2Center the timer pointer
Rotate the flywheel in a
f21 3Install OMC Piston Stop PIN 384887 in No1 spark plug hole and turn in center portion until it contacts the No1 pistonLock the tool in place with ring