1990 Johnson Evinrude "ES" 40 thru 55, P/N 507872, Page 280Get this manual
43 7guide
Push core wire
(from engine end) through wire clamp
Q) until wire is flush in(0,8 mm) with end of casing
144Turn
set screw in on large end of wire clamp until it touches core wire, then tighten exactly one more turn This kinks and locates core wire
45Grease trunnion pocket of controlLift throttle cable and rotate cable forward until trunnion cap can be inserted into trunnion pocket of control
146Position throttle lever by hand to align rear hex screw with