1990 Johnson Evinrude "ES" 40 thru 55, P/N 507872, Page 152Get this manual

1990 Johnson Evinrude "ES" 40 thru 55, P/N 507872, Page 152

1421 45Install starboard lower engine cover mount bracket and torque screws to 60-84 inIbs(7-9 Nm)46Install the complete ignition, electrical and fuel systemTo prevent possible fire or explosion, make sure all electrical and ignition wiring is routed and clamped in its original positionInstallation 1Position new powerhead gasketDo not use sealer on the gasket If'

of driveshaft in crankshaft
LJ top surface of driveshaft as lubricant here may prevent seating
3Lower the powerhead assembly into place
[":;1 2Coat driveshaft splines with OMC Moly LubeDo not coat

r:;] 4Apply OMC Gasket Sealing Compound to threads of the

Back to 1990 Johnson Evinrude "ES" 40 thru 55, P/N 507872