1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 436Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 436

Trim Sending Unit Adjustment It might be necessary to adjust the trim sending unit to coincide with the trim gauge at full trim-up positionTo do this, proceed as follows: 1Turn ignition key to the ON position2Raise the engine with the tilt switch to maximum trim-up position
1341 3V4 modelsmove the angle adjusting rod to the center
[351 4Loosen the sending unit screws
sending unit can be pivoted
until only snug, so the

5V4 modelslower the engine all the way down against the angle adjusting rod6V6, va modelslower the engine to the midpoint of the trim range

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875