1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 360Get this manual
1431 7Push core wire CD (from engine end) through wire clamp Q) until wire is flush 1132 in(0,8 mm) with end of casing guide Turn set screw in on large end of wire clamp until it touches core wire, then tighten exactly one more turnThis kinks and locates core wire1 45
Grease trunnion pocket of controlLift throttle cable and rotate cable forward until trunnion cap can be inserted into trunnion pocket of controlPosition throttle lever by hand to align rear hex screw with access hole in controlInsert hex wrench through hole and tighten second set screw
r;::;l 8The throttle lever arm must be in the idle position before reassemblyMove the throttle lever arm forward toward the front of housing half until it contacts the stop CD