1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 353Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 353

Remote Control Servicing
Disassembly

i systemsFailure to do so could result in injury from ignition

1Disconnect battery cables before servicing electrical

sources (sparks) or from contact with moving parts if accidental cranking or starting occurs

2To remove control handle, loosen Allen head screw three complete turns
Igl 3Support control on blocks to allow the control handle to be l-=.J driven off the controlPlace center punch in head of Allen head
screw and tap with plastic hammer to disengage the control handle splines from the hub splinesRemove the Allen head screw and the control handle

4Remove three screws halves apart

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875