1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 304Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 304

f181 18Press shift detent down to engage REVERSE (lowest) positionThis will provide clearance to install the clutch shaft assemblyr,gl 19Note the position of the locating pin at the front of the housingThe pin must engage corresponding recess inside the nose of the gearcase 1201 20Tip the rear of gearcase slightly downwardThis will help

hold the housing, washer, bearing and gear together, as well as keep the shift detent in the depressed positionInstall the clutch shaft assemblyMake sure the locating pin is properly engaged after the assembly is installedf21'l 21Lubricate new shift rod cover a-ring with OMC Triple-Guard greaseInstall the a-ring into the shift rod cover

1221 22Place the shift rod grommet and shift rod spacer on

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875