1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 297Get this manual
133-' DR2061 DR2062
rJ1l 9To replace the large bearing, lightly coat the outside case with gearcase oilFace the lettered end of the bearing case toward the large diameter end of OMC Bearing Installer PI 432401 and slide it onto toolPress bearing into housing until the tool seats321 10To replace the small bearing, lightly coat the outside case with gearcase oilPlace lettered end of bearing case on small diameter end of OMC Bearing Installer PIN 432401, then press bearing into housing until the tool seats3311341 11Install new seals back to back in the bearing housing using OMC Seal Installer PIN 326690Apply OMC Gasket Sealing Compound to the metal casing ofthe seals before installingInstall the inner seal with lip facing toward the bearing housing and the outer seal with lip facing away from the bearing housing1351
OMC Triple-Guard grease to the seal lips after