1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 277Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 277

COA3562

COA3563

COA3564

1281 '" 20The detent ball and spring can come out with great forceWear safety glasses for eye protectionPut shop cloth around the assemblyPull the detent lever out of the bearing housing and remove the detent ball Q), springand the shift lever (021The forward gear bearing and bearing housing are serviced as an assemblyIf either is worn or damaged, replace the assembly22If removed, the pinion bearing must be discardedInspect bearing for damage without removing, if possible1291 23Remove the pinion bearing only if it needs to be replacedRemove the retaining screwDiscard the O-ring from the screw1301 24If the driveshaft bearing must be replaced, use OMC Bearing Remover and Installer PIN 391257 and assemble it as follows:

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875