1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 267Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 267

f17l 20Apply OMC Gasket Sealing Compound to the threads of the shift rod cover screwsInstall the screwsTighten the screws to torque of 60-84 inIbs(7-9 Nm)
f18l 21Position the driveshaft thrust bearingthrust washer ,
and shim(s) (selected earlier) on the driveshaft
Note Position items, and exactly in the order shown
f1911201 22Lightly apply OMC Gasket Sealin9, Compound to the

gearcase area that contacts mounting flange of the bearing housingDo not coat inside bearing housing bore surface of the gearcaseUsing OMC Driveshaft Seal Protector PIN 318674, slide the driveshaft bearing housing onto the driveshaft
COA3130

23Pull up on the shift rod to engage FORWARD gear positionTurn the gearcase upside down by rotating the holding fixtureDegrease inside taper of the pinionPosition the pinion in the gearcase24Degrease the driveshaft taper and install the driveshaft25Lightly coat the threads of the pinion nut with outboard

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875