1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 261Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 261



COA3559

7Install two new seals back to back in the rear of the bearing housing V4 modelsuse OMC Seal Installer PIN 326551 V6 modelsuse OMC Seal Installer PIN 3266908Apply OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the bearing housing and install the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installingr:;] 9Lightly apply OMC Triple-Guard grease to new bearing housing O-ringInstall the O-ring in groove of the housingInstall new seals on the retaining screws

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875