1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 243Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 243

1141 6Install the adapter housing on the outer exhaust housingAlign the water tube7Loosely install the small retaining screws 8Lubricate the upper mount with soapy water and push into
place in the adapter housingThe mount radius must face aft and the "TOP" mark must face up
9Apply OMC Locquic Primer and OMC Nut Lock to the upper mount plate screws and install the plate and screws looselyInstall the ground lead and star washer under the forward starboard screw1,6l 10Align the outer exhaust housing and adapter by placing
two powerhead mounting screws through their holes
f17l 11Torque the four mounting plate screws to 22-24 ftIbs(30-33 Nm)

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875