1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 216Get this manual
COA1373
Starter Rope Replacement
& 1Wear safety glasses while servicing the manual starterrv C-clamp and wood blocks, itclamp the starter pulley Using 2Pull the starter rope until is completely unwoundin this
position
Untie the knot in the starter rope and remove rope
4Remove the rope anchor from the starter handle5Separate rope from anchor and discard rope6Cut new rope to length of 96 12 in(245 em)Fuse ends of rope to length of 112 in(12 mm)f31 7Using OMC Rope Threading Tool PIN 378774, thread the rope through the starter handlef2l 8Place the starter rope in the rope anchorPosition the anchor in the handlef4l 9Insert the rope through the starter handle bracket, rope L!:J guide and into the starter pulley10Tie knot in end of starter rope as illustrated11Insert the knot into the rope cavity of the starter pulley12Carefully loosen the C-clamp and slowly allow the rope to recoil