1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 212Get this manual
1331 26Install one flat washer and pulley screwTorque the screw to 60-84 inIbs(7-9 Nm)1341 27Install nut onto pulley screwTorque nut to 60-84 inIbs(7-9 Nm)28Check the operation of the starter pawlThe pawl should extend when the pulley moves in counterclockwise direction, and retract when moved in clockwise direction1351 29Using the correct sequence of rubber bushings and washers, install the starter handle bracket1361 30Torque the bracket retaining screws to 60-84 inIbs(7-9 Nm)31Wind the pulley in counterclockwise direction until the starter spring is tight32Back off the pulley in clockwise direction 1'2 to turns, until the rope cavity of the pulley is aligned with the rope guide-