1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 172Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 172

Ohmmeter TestStop Button

All ohmmeter tests must be performed with engine NOT running
f41 1Separate the 1-pin connector between the stop button and the power pack2Calibrate ohmmeter on Rx100 scaleConnect the meter red lead to the terminal in stop button end of the connector, and the meter black lead to clean engine ground Button depressed, meter must show continuity Button not depressed, meter must show no continuity (00 )3If engine fails to shut off, test for open blackyellow lead from power pack or open black lead from stop button4Complete all circuits disconnected during this test&

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875