1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 116Get this manual

1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875, Page 116

Installation 1sl 1Install the flywheel key centerline of crankshaft with the outer edge parallel to

f61 2Clean the crankshaft and flywheel tapers with OMC Cleaning Solvent and let dryThese surfaces must be clean and dry to allow proper locking of the tapersf71 3Align the flywheel keyway and install flywheelCoat the threads of new flywheel nut with OMC Gasket Sealing CompoundInstall the nut and torque to 140-150 ftIbs(190-204 Nm)1sl 4If equipped with power steering, align the pulley and install the six screwsTorque the screws to 60-84 inIbs(7-9 Nm)

Back to 1990 Johnson Evinrude 120 thru 140, 185 thru 225, 300 HP, P/N 507875