1989 Johnson Evinrude "CE" Colt/Junior thru 8 Service Manual, P/N 507753, Page 170Get this manual
Assemblythru Deluxe Proceed slowlyMake no forced assemblies unless pressing operation is called forAll internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard LubricantINotel Use new gaskets, seals, and O-rings during assemblyNote
I Make sure water deflector is in place
1Apply coat of oil to wrist pin and wrist pin hole in piston2Insert wrist pin through "L" side of pistonOil wrist pin bearing in connecting rod and place in positionInstall wrist pin using OMC Wrist Pin Pressing Pin PIN 326624 and OMC Piston Cradle PIN 326572Install new wrist pin retaining rings
INote Pressing pin must enter "L" (loose) side of piston1211 Install piston rings on pistonSpread each ring with ring
4Coat the piston and cylinder bore with oil