1989 Johnson Evinrude "CE" Colt/Junior thru 8 Service Manual, P/N 507753, Page 140Get this manual
Installation 1sl 1If flywheel key has been removed, reassemble to crankshaft with outer edge parallel to crankshaft centerline Isl f51 2If removed, install magneto cam drive pin CD
in crankshaftApply OMC Nut Lock to the cam drive pin before installingInstall cam making certain that side marked "TOP" is up
3Apply light coating of OMC Moly Lube to the inside diameter
of the armature plate liner
Igl f101 4L!J
Install washer and liner on crankcaseCurved side of liner tab must face crankcase
the liner tab in slot in armature plate hubMake sure that throttle cam follower is not caught under throttle control camInsert screw and tighten just enough to hold armature plate in selected position yet allow it to be turned without excessive effortConnect ground wire to exhaust coverBreaker Point Adjustment
'3l 5Place the armature plate in position over the liner with