1989 Johnson Evinrude "CE" Colt/Junior thru 8 Service Manual, P/N 507753, Page 122Get this manual
Ohmmeter Test
INotel A.II ohmmeter tests must be made with engine NOT runnmg
L!.I emergency ignition cutoff device
f41 1Most steering handles contain combination stop button When the clip and lanyard is removed, the emergency ignition cutoff device is in the STOP position When the clip and lanyard is installed, the emergency ignition cutoff device is in the RUN position To STOP the engine when the clip and lanyard is in place, press inward on the button2Install the clip and lanyardf51 3Calibrate an ohmmeter on Rx100 scaleConnect meter leads between stop button 1-pin Amphenol connector and clean engine ground The meter must show no continuity00 4Momentarily press inward on the stop button The meter must show continuity5Remove the clip and lanyard The meter must show continuity)