1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 318Get this manual
Assembly
propeller thrust
ill in operator losing control of engine speed or direction of
friction points on mechanical parts withOMC Triple -Guard grease
Failure to follow assembly instructions closely could result
INotel Lu.bricate
1To reassemble control handle, place control handle knob on control handle and secure with screwTighten screw to torque of 20-30 inIbs(2,3-3,4 Nm) Position trimtilt switch into control handle coverSecure switch to control handle cover with screw Secure control handle cover to control handle with four screws Apply OMC Triple-Guard grease to slide return spring Place slide return spring onto control handle as shown in figure Compress the slide return spring with neutral lock slide and snap neutral lock slide onto control handleAfter installed, spring tension must be felt when pulling up on neutral lock slide Install plate with two screws to control handleTighten screws to torque of 25-35 in Ibs(2,8-3,9 Nm)2Install the key switch, warning horn, and emergency ignition cutoff switch to the remote control, if removed