1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 316Get this manual
- Disassembly
Remote Control Servicing
1Disconnect battery cables before servicing electrical systemsFailure to do so could result in injury from ignition sources (sparks) or from contact with moving parts if accidental cranking or starting occurs
2To remove control handle, loosen Allen head screw three complete turns
19 3Support control on blocks to allow the control handle to
be driven off the controlPlace small punch in head of Allen head screw and tap with plastic hammer to disengage the control handle splines from the hub splines Remove the Allen head screw and the control handle