1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 274Get this manual
r:tJil 9Bend the inside loop of the rewind spring in toward the C?f the starter nousing Engage the pin of the pulley with the Inner loop of the rewind spring and install the pulley in the starter housing the bushing and the shim into the starter pulleyNext install the friction platelinks and pawlsSecure the pawls with the retaining clips
r;5l 10.lightly apply GMC Triple-Guard grease or Lubriplate 777 to the spindle bushing and pawl pins on the pulleyInstall
1-f51 11Lightly apply GMC Triple-Guard grease or Lubriplate 777 to the spindleInstall the spindlefriction ring and two spring washers
INote The
section of the friction ring and spindle be aligned