1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 273Get this manual
Assembly
ill manual starters because of rewind spring tension
"" Wear safety glasses while disassembling and assembling
f]l 1Using OMC Starter Spring Winder and Installer PI 392093, L!J clamp spring winder base CD in vise Insert adapter release plate into spring winder base101 2Apply OMC Triple-Guard grease or Lubriplate 777 to the L!J rewind springPlace inner loop of rewind spring in the spring winder baseInsert the pin of the crank and pin assembly into the inner loop of the rewind spring Secure the crank and pin assembly to the starter winder base with the crank retainer screwInl 3Rotate the crank and pin assembly in the direction shown on the toolWind the spring into the starter winder base until end of rewind spring contacts the starter winder base