1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 247Get this manual
az2?2?:;c:a J (J "
1361 12Assemble the small pinion thrust washer with the inside
chamfered diameter onto the pinion, chamfered side facing pinionOil and install the thrust bearing Install the large thrust washer with chamfered outside edge facing up37
13Using right angled rod, install the pinion assembly in the gearcase14Place the forward gear into the gearcase15Install shifter cradle on clutch dogGrooved end of clutch dog must face forward gear end of the propeller shaftCOB3065
INote Apply OMCcradle toBearing Assembly Grease to clutch dog Needle and shifter hold in place while assembling16Install the shifter cradle and clutch dog in the gearcase using long-nose pliersr;-:;l 17Apply OMC Triple-Guard grease to new pivot pin 0ring Install the -ring on the pivot pin Apply OMC Nut Lock to threads of the pinAlign hole of the shifter lever with hole in the gearcaseInstall and tighten the pivot pin to torque of 48-84 inIbs(5-9 Nm)