1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 245Get this manual
COA3269
COA3267 1
Assembly
1Note Make no dry assembliesLubricate bearings, shafts, and
gears with OMC Hi-Vis gearcase lube
1251 1Oil and install new bearing in aft end of the bearing housing using OMC Bearing Installer, PI 321429Press against the lettered side of the bearing to prevent damage to the bearing when installingPress the bearing into the housing until the tool is seated on the housing1261 2Oil and install new bearing in the forward end of the bearing housing using OMC Bearing Installer, PI 321428Press against the lettered side of the bearing until the tool is seated on the bearing housing
12711281 3Installusing seals back to back in PINend of the bearing new aft OMC Seal Installer, 326546Apply housing
OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing into the bearing housing and install the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installing4Lightly apply OMC Triple-Guard grease to new bearing housing O-ringPlace the O-ring in groove of the bearing housing