1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 243Get this manual
I 19.5 mml
tq (S.4-;;mI1 4"
15Use modified OMC Narrow Two-Jaw Puller, PI 391010, and slide hammer to remove the forward bearing cupThe modified puller should fit into grooves behind the bearing cup with jaws facing to port and starboard of the gearcase1201 16Use OMC Bearing and Seal Remover, PI 391259, to remove the driveshaft seals from the gearcaseInspect bearings in placeIf bearing is removed for any ote reason It must ace rep f211 17Remove the upper driveshaft bearing and bearing sleeve from the gearcase using OMC Bearing and Seal Remover, PI 391259 Discard the bearing1221 18To remove the pinion bearings, assemble the following components from OMC Universal Pinion Bearing Remover and Installer PI 391257 :
r:J8l r:J9l